Action Machinery, Inc.
(502)-459-1313  Fax (502)473-1953
Geka ALPS

ALPS 150
Complete processing system for
punching, marking, and cutting angle
iron, channel, and flat bar sections.
Capacities: angle up to 6"x6"x1/2",
channel up to 4", and flat bar up to 6".

The ALPS 150 (Automatic Line Punching and Shearing) is a complete processing system for punching, marking, and cutting angle iron, channel, and flat bar.

GekaALPS_Back.jpg (146206 bytes)
Rear View
GekaALPS_Front.jpg (112142 bytes)
Front View
Capacities
90° Angle: 1-3/8" x 1-3/8" x 3/16" to 6" x 6" x 1/2"
Channel: 2-1/2" to 4"
Flat Bar: 2" to 6"
Max Section Length:  40'
GekaALPS_PunchHead.jpg (100287 bytes)
Punching Head
  • Punching Tonnage: 80 Tons
  • One Punching Station for each leg of the angle profile.
  • Each head is equipped with 3 punches, which can be individually selected through the controller.
  • Punching capacity of 1-7/32" through 1/2" thick material.
  • Adjustable punch stroke by means of limit switches.
  • Suitable for punching channel in the web and flat bar.
  • Bridge type closed frames for support and rigidity.
  • Hydraulic Stripper
  • Punching Heads mounted on tempered linear guide rails.
  • Hydraulic positioning of punching head, positioning accuracy ensured with proportional valves and linear encoders.
  • Positioning tolerance +/- .003"
GekaALPS_ShearHead.jpg (87106 bytes) Shearing Head
  • Shearing Tonnage: 200 Tons
  • Cutting capacities of 6" x 6" x 1/2" for angle iron, 4" for channel, 6" x 1/2" for flat bar.
  • 3 sets of blades to cover 2-1/2" to 4" channel.
  • Direct access to blades for quick change
  • Adjustable cutting tool stroke by means of limit switches.
GekaALPS_MarkingUnit.jpg (90829 bytes) Marking Unit
  • Marking Tonnage: 80 Tons (Adjustable)
  • Control unit can select 5 different marks
  • Each mark has a row of 10 digits with 3/8" height.
  • Quick-change character holder
  • Mounted on tempered linear guide rails.
  • Manual positioning of marking head
GekaALPS_FagorCNC.jpg (63348 bytes) Fagor Windows-based CNC Control
  • Easy programming using Windows-based software
    specifically designed for the ALPS 150.
  • Programs stored in database for easy re-call.
  • Includes modem to link to technical support.
  • Includes network card for communication with LAN.
  • Compatible with any structural design software.

 

Feeding System
  • The profile is fed through the machine by two sets of synchronized rollers
    driven by a brushless AC motor and controlled by the CNC Controller.
  • Feeding speed from 0 to 120'/min.
  • Positioning accuracy +/- .003"
Standard Equipment
  • Input Roller System for material up to 40'.
  • Output Roller System for support 40".
  • Complete hydraulic system with 25 HP Motor.
  • Fagor numerical PC-based control system with control cable.
  • Programming and Communications software.
  • 1 set of spare blades for shearing angle.
  • 3 sets of spare blades for channel.
  • 1 set of spare blades for flat bar.
  • Set of 80 standard round punches and dies.
  • Set of 20 standard oval punches and dies.
Optional Equipment
Material Feeder Unit
for Automatic Loading
and selection of profile
to be processed.
Material Exit Rollers
with automatic material
flipping to sort up to
3 different references.
GekaALPS_Opt2.jpg (63775 bytes) GekaALPS_Opt1.jpg (62981 bytes)

 

 

Website Builder