Action Machinery, Inc.
(502)-459-1313  Fax (502)473-1953
Geka ALPHA 500


ALFA 500

Complete processing system for
punching and shearing of flat bar
and angle iron. Capacities: plate up
to 20" wide by 3/4" thick and angle
up to 6"x6"x1/2" (90° angle).
 


Capacities
90° Angle: 1-1/2" x 1-1/2" x 1/4" to 6" x 6" x 1/2"
Flat Bar: Up to 20" x 3/4"
Table Feed Length:  20' (optional additional 20' length available)

GekaALFA500_PunchUnit.jpg (105989 bytes)
Vertical Punching Unit
  • 55 Ton Vertical Punch for punching vertical leg of angles
  • Maximum Punch Diameter: 1-1/4"
  • Urethane stripper
  • Maximum positioning speed in the Z axis: 460" per minute
  • Vertical movement of the punch is variably controlled by a hydraulic cylinder
  • 88 strokes per minute at 3/4" stroke
GekaALFA500_PunchHead.jpg (100666 bytes)
Horizontal Punching Unit
  • Horizontal Triple Punch with 20" throat depth
  • Punching capacities:
          Center punch: 120 Tons
          Two lateral punches: 80 Tons (each)
  • Maximum Punch Diameter: 1-1/4" (optional 1-1/2" diameter center punch)
  • Hydraulic stripper
  • Punches are invidually selected through the CNC Controller
  • Maximum positioning speed in the Y axis: 460" per minute
  • Horizontal movement variably controlled by DC servo motor and ball screw
  • 44 strokes per minute at a 3/4" stroke
GekaALFA500_Shearing.jpg (76844 bytes)
Shearing Station for Plate and Angle
  • Universal shearing unit for 90° cuts using a hydraulic holddown
  • One shearing unit able to cut plate and angle in the same station without blade change
  • Plates up to 20" x 3/4"
  • Angles up to 6" x 6" x 1/2"
  • Optional blades for cutting up to 5" channel
GekaALFA500_GuideClamp.jpg (113074 bytes)
Hydraulic Shear Holddown
  • Integrated Automatic guide and clamping
  • Positive holddown pressure ensures accurate cutting tolerances
  • Universal holddown accommodates both flats and angle
GekaALFA500_CNC.jpg (97020 bytes)
Fagor Windows-based CNC Control
  • Easy programming using Windows-based Fagor 8070 Controller with GEKA-Pro software
  • All machine functions are controlled by the CNC Controller
  • Programs stored in database for easy re-call.
  • Optional GEKA software to allow importing of various file types such as DXF, DSTV, and others; and nesting for optimizing production, weight stock and purchasing management reports, graphic display, and program generation
Feeding System
  • Material is pushed in the X axis by a rack and pinion
    with a DC motor.
  • Material is indexed against fixed rollers by pneumatically activated side rollers for accurate movement of the material.
  • Maximum feed rate of 900" per minute
  • Positioning tolerance of +/- .006 per foot, non cumulative

 

 

Website Builder