Action Machinery, Inc.
(502)-459-1313  Fax (502)473-1953
Ficep Victory CNC Drill

VICTORY 11 CNC Single Spindle Drill

    Victory 11 CNC Single Spindle Drill

The Ficep Victory 11 is uniquely different than the concept of traditional CNC drill lines.  This product line features a movable spindle that rapidly travels the entire length of the material.  Once the spindle is at the programmed position, top and bottom internal clamps quickly secures the material as the drill positions to the programmed gauge line and commences drilling.

The versatility of this CNC system can be exhibited when processing the following typical applications:

  • Flange drilling
  • Web drilling
  • Automatic sequencing from one section to the next
  • Angles
  • Plate detail
  • Structural tubes

wireless remote control system

Our wireless remote control system eliminates up to 30% of the operators movements as he does not constantly have to walk up to 60' in each direction just to start the process on the next section. In addition the operator always has access to the emergency stop on his wireless remote to assure safe operation.

Our competitor promotes drilling speed at 6 3/8 inches per minute for 500 holes in 66 minutes and 45 seconds. At the end of the 500 holes the beam could not be wetter if it fell in the ocean! Take a look at what drilling at 13 inches per minute (without coolant running down the beam) gets you with the Victory 11 DX. A hole approximately every 5 seconds or 500 holes in just 43 minutes and 26 seconds!

Website Builder