Action Machinery, Inc.
(502)-459-1313  Fax (502)473-1953
BOSCHERT VARI IV


 

 
    
VARI IV Hydraulic Variable Angle Notcher

Special Features -

5/32" mild steel* capacity
11 ga. stainless steel** capacity
5.9" x 5.9" notch
All Angles from 30° to 120° without blade or clearance changes
Front to back cutting to hold material against stop
Milled bed surface for no float or stick operation
39.4" wide by 25.6" deep table
Two 30° upper blades working directly with two correpondending lower blaes
Blades are automatically shifted by pneumatic power
Hi-Carbon, Hi-Chrome blades that overlap on the cutting edge to eliminate blade chipping
T-slots and engraved brass scales on the table
Two heavy duty adjustable stops with 12" sliding bars
Engraved brass scales
Solid-state circuitry with moveable electric foot pedal
Jog, single or continuous mode
Ability to notch into the bend of a 90° angle
Clear view of the blades tips
6.5 horsepower drive motor
Scrap bucket

* mild steel designated as 50,000 psi
** Stainless designated as 75,000 psi


BOSCHERT Patented Quality -

The patented Boschert TRI-GIDE™ system gives all Boschert notching machines the greatest accuracy and durability of any notcher made today.

TRI is for the three large guiding cylinders. Two cylinders are in the top of the machine, close to the blades, the third is in the base and fully integrated with the hydraulic piston.

GIDE is for the precise vertical travel of the ram. Torque from cutting heavy material is distributed evenly to all three cylinders.


TRI-GIDE™ Eliminates -

Blade clearance adjustment for different material thicknesses
Frequent blade sharpening due to sloppy guiding
Uneven wear, and replacement problems with
traditional guiding systems


Exclusive TRI-GIDE™ Benefits -

Long blade life due to precise, rigid ram guiding
Burr-free cuts on all gauges (within capacity)
Off-center loading – 1" x 6" notch is no problem

TRI-GIDE™ is just part of the overall quality and ingenuity that goes into every Boschert Notcher. Other features include:

Front-to-Back cutting - holds material against stops
Milled table surface – keeps material from sticking
Hi-Carbon Hi-chrome Blades – overlap on the cutting tip to eliminate blade chipping
Thousands of machines installed in North America
Parts for all machines ever built are available

How the BOSCHERT SYSTEM Works -

A 30° upper blade is directly connected to two corresponding lower blades. All notches of more than 30° are accomplished automatically with a right and left notch. Pneumatic power rotates the blades after each stroke. 




 

Website Builder